How much and when to put it ??
It is advisable  to add Ceramic Power Liquid® to the engine oil when you do the oil change. If you want you can also add it to oil in good conditions, i.e. when you’ve run  less than 1864 miles after the last change. It’s important to pay attention to oil level. The quantity you need to treat your engine depends on its displacement . For engines up to 1500 cc you need 0.3 liters and to treat engines up to 2500 cc you need 0.45 liters. For  higher-powered  ones a bigger quantity of product is necessary.

What kind of ceramic is it?
All our opponents ask themselves that too

Do you have to put it into the petrol? Or in the oil?
Always in the oil, only in two-stroke engines, if there isn’t the blender, put it into the fuel.

How does it work ?
Please read once again the first pages of our web sites.

How much time does it take to see the product result on my car ?
Normally the effect can be noticed after about 124-186 miles , but in some cases you may need  up to 621 miles too.

Is it suitable only for old cars, or cars with a lot of miles on the clock ? Do you notice the difference on the new ones
Ceramic Power Liquid can be used also on new vehicles which have for example only 12.500 miles ; in this case the car doesn’t  show any particular problems, and so  the treatment has to be considered as a future precautionary measure for the engine.

Do you always have to put it at the oil change ? Otherwise what could happen ?
Anything bad would happen , but we recommend anyway to add it to a new oil. In fact, Ceramic Power Liquid, used with new oil, gives a better effect of lowering its temperature.

Is it enough to  change oil or do you have to change the filter too ??
It’s also  a good idea to change oil filter too !!

How long does the treatment with Superbike effect last ?
In the motorbike it lasts  for about 25-31.000 miles , while in engines with less revolutions  can last also up to 62.000 miles

Can I use CPL normal for  my motorbike too ?? In this case, how long does the treatment last ?
If the engine turns under 5.000 revs, the duration can be up to 62.000 miles, if on the contrary turns faster the efficacy duration is lower.

Can I use it also if my motorbike has the oil bath clutch? Why doesn’t it slip ?
Ceramic Power Liquid acts only on the metallic surface , which is constantly exposed to rubbings ; so the clutch isn’t corroded by this process.

If I put more of it , do I choke the engine up ?Does this  risk exist  for every kind of engine ?
Anything bad  would happen, because ceramic particles don’t attack each other . Only problems for two-stroke engines can arise, in fact , putting an excessive quantity, there is the risk  sparks get dirty.

If the car is GPL fed , what do I have to put ?
Ceramic Power Liquid Normal

My motorbike has the gear oil together with the engine one, what do I have to use ?
Ceramic Power Liquid Normal

Is there the chance something gets damaged ?
On the first 500.000 flacons sold we didn’t have any problems, so we don’t see any reasons you should have some problems .

Can I use CPL for Gear for my motorbike too ?
It’s possible to use it without any risks , but the result isn’t optimum .

What difference is there compared to other products on the market, P.T.F.E. based ?
P.T.F.E. and ceramic aren’t comparable . P.T.F.E. doesn’t resist to hot temperatures, when it burns it produces dioxine gas and furthermore  there is the risk of an enlargement of particles up to 20 micron. To get more information read our drivers’ verdicts and you will know what engines experts do think about it.

If I’ve used  P.T.F.E. based products before, can I use CPL the same ?? Or can they interact ?
If you’ve already done 2 oil changes, Ceramic Power Liquid can be used without big problems. If  on the contrary P.T.F.E. is still recent, you should  do an engine-washing : emptying the oil pan, putting the new oil mixed with about 15 % gas-oil, making engine turn at the idle speed and then putting the normal oil together  with Ceramic Power Liquid.

What does it happen if I re-make the treatment before having done 62.000 miles ?
Ceramic Power Liquid deposits itself on the engine walls  and goes away  only after 62.000 miles , in the meantime  you can do all the oil changes you want . If the treatment  is re-made before, it helps only the Ceramic Power Liquid  seller.

After the 62.000 miles , what is the end of the  ceramic film inside the engine  ?
During the last 15.500 miles the film is slowly consumed. The biggest particles stay in the oil filter and the smallest ones go into the circulation together with the engine oil. In the oil and filter change they get eliminated from the engine.

If I use CPL on a cast iron engine is there the risk it blows out ?
No.

I’ve got a Porsche  911 cc 3200: which CPL do I have to use ??In which quantity ? How long does the efficacy last ?
We can advise you  to put n. 2 flacons of Ceramic Power Liquid Sport, whose duration is of about 37.200 miles

I’ve a scooter with two-stroke engine , which CPL should I use ? And how long does the treatment last ?
The product suitable to use is Ceramic Power Liquid two-stroke, whose duration is about 6.200-9.300 miles

After how long can I see the result using CPL two-stroke??
That depends on the driving style of each person; on average we noticed the effect begins at about 310 miles

In which quantity do I have to use  CPL Nautic ? Which are the directions to use it ?
You should use one flacon of 450 ml  every 2.500 cc. For directions see the ones for Ceramic Power Liquid normal.

Which warranties are there that the products works and doesn’t damage anything ??
Read once more the testimonies of people who tested Ceramic Power Liquid before you..